Devicenet Configurator Software

Posted : admin | On 16-09-2021

DeviceNet Configurator The Configurator is a software product that provides a graphical working interface to enable easy-to-understand setting, startup, and maintenance of a multi-vendor system.
What’s in This Chapter This chapter introduces the DeviceNet cable system and provides a brief overview of how to set up a DeviceNet network efficiently. The steps in this chapter describe the basic tasks involved in setting up a network. For information on this topic see page Before You Begin 1-2 Set Up a DeviceNet Network 1-4 Understand the.
I have never worked with devicenet. I have to set the baudrate and node address of three stoneL slave i/o modules. (no rotary switches on these guys) model#465012 I have no setup software and I think I need a devicenet configurator software and a bus connection adapter (preferrably USB).

DeviceNet devices are configured using external hardware or software configuration tools. External hardware can include rotary switches, thumbwheels, dipswitches and other fixed input devices. Software configuration tools access the internal configuration of the device over the DeviceNet network or other communication port. The Slate Configuration Utility software is used for configuration and troubleshooting of the module. The stand-alone configuration utility allows users to define the setup and configuration of the DeviceNet Router module, connections with controllers and devices.

A-DNTR

The DeviceNet Router provides a powerful and easy to configure solution to exchange data between DeviceNet™ devices and a Logix controller or PanelView via EtherNet/IP™. The module is able to asynchronously exchange data between a DeviceNet polling master (scanner) and an Ethernet PCCC device. Produced and consumed data sizes are independently configurable from 0 to 128 bytes each.

The consumed (DeviceNet) data can then be mapped to a PLC5 type address file, e.g. N33, and then read by an Ethernet device e.g. a PanelView. Similarly, the produced data (DeviceNet) can also be mapped to a PLC5 type address file, to which an Ethernet device could write. The Router supports transferring parameters from a DeviceNet device directly to Logix tags. The scaling of the parameter values will either be extracted from the EDS file imported or can be manually updated by the user. The module also provides a range of statistics and an on-board DeviceNet traffic analyzer to assist with fault finding. A built-in webserver provides detailed diagnostics of system configuration and operation, including the display of DeviceNet operation and communication statistics, without the need for any additional software.

Architectures

Features and Benefits

DeviceNet to Ethernet Interface
PCCC or EtherNet/IP protocols
PLC5 Emulation Mode
Direct-to-Tag Technology
Advanced Diagnostics, including packet capture

Configuration

The Slate Configuration Utility software is used for configuration and troubleshooting of the module. The stand-alone configuration utility allows users to define the setup and configuration of the DeviceNet Router module, connections with controllers and devices.

Specifications

EtherNet/IP Network

Specification	Description
Connector	RJ45
Conductors	CAT5 STP/UTP
ARP Connections	Max 20
TCP Connections	Max 20
CIP Connections	Max 10
Communication Rate	10/100 Mbps
Duplex Mode	Full / Half
Auto-MDIX Support	Yes

DeviceNet Network

Specification	Rating
Connector	5-way terminal, 5.08 mm pitch.
Conductors	12 to 30 AWG
Baud Rate	125k, 250k, 500k
IO Messaging	Polled Change of State (COS)
Unconnected Message Manager (UCMM)	Yes
Max Explicit Connections	5

PCCC Network

Specification	Description
Max PCCC Connections	10
Max PCCC Payload	1000 bytes

Hardware

Specification	Rating
Power Supply	Input: 10 to 28 VDC, (70 mA @ 24VDC)
Power Consumption	1.7 W
Dimensions (H x W x D)	101.0 x 22.5 x 120.0 mm
Connector	5-way terminal, 5.08 mm pitch.
Conductors	24 to 18 AWG
Enclosure Rating	IP20, NEMA/UL Open Type
Temperature	-20 to 70 °C
Humidity	0 to 95% RH, non-condensing
Earth Connection	Yes, terminal based
Emissions	IEC61000-6-4
ESD Immunity	EN 61000-4-2
Radiated RF Immunity	IEC 61000-4-3
EFT/B Immunity	IEC 61000-4-4
Surge Immunity	IEC 61000-4-5
Conducted RF Immunity	IEC 61000-4-6

Downloads

DeviceNet Router Datasheet	675.12 kB	Last Modified 09/04/2020
DeviceNet Router Quick Start Guide	414.62 kB	Last Modified 06/30/2020
DeviceNet Router User Manual	4.38 MB	Last Modified 06/30/2020
DeviceNet Router EDS Files	1.77 kB	Last Modified 06/30/2020
DeviceNet Router Examples	224.01 kB	Last Modified 07/02/2020
Slate Software v1.053	40.18 MB	Last Modified 11/18/2020

Certifications

Certificate of RoHS Compliance	222.76 kB	Last Modified 09/28/2020
UL/cUL; Class1, Div 2	351.49 kB	Last Modified 10/01/2020

Related searches

» devicenet configurator software
» devicenet configurator update download
» download devicenet configurator
» devicenet configurator download
» devicenet configurator upgrade
» ｄｅｖｉｃｅｎｅｔｃｏｎｆｉｇｕｒａｔｏｒ
» network configurator for devicenet
» etwork configurator for devicenet safety
» network configurator for devicenet safet
» rsnetworx for devicenet software